Service clay target throwers
Whether you have a full 12 station sporting clays course, a 5-stand shooting range or just a trap machine on the camp porch, regular maintenance of this equipment is needed to keep everything working. Let’s face it, maintenance of trap machines is not fun or gratifying. As such, performing this maintenance seems to be low on the priority list for most owners until it’s time to shoot. It is quite frustrating when friends or family come out to shoot and a machine(s) malfunctions or simply doesn’t work. Through experience in managing several sporting clays courses and 5-stand shooting ranges, I’ve learned that regular maintenance significantly reduces “down time” and helps machines last longer. If your machines are actively used throughout the year, it’s a good idea to check and service them each month to ensure proper operation. Each machine should be cleaned, lubricated, tested, adjusted, and if necessary, replace any worn parts. Two of the most common problems encountered are battery and controller wire issues. Batteries are similar to a boat in that you “use it or lose it”. The longer they sit idle the more problems you can expect to experience. If you don’t have solar trickle chargers for your trap machine batteries consider adding these. Solar chargers are relatively inexpensive and keep batteries charged and active through trickle charging. They also eliminate the need to remove and transport batteries to a power source for charging. My life changed when I discovered wireless remote controllers for trap machines. I have no idea why squirrels and other rodents are so attracted to controller wires, but they regularly find and chew them which shorts the connection. Installing wireless remotes eliminates the need for a wire to run through the woods from the machine to the shooting station – and removes potential problems. Wireless remotes also allow you to easily move trap machines for different shots/angles without having to deal with a long wire to controllers at the shooting station. Like any equipment, preventative maintenance on trap machines will result in fewer problems and longer machine life. Like the Nike advertisement – If you want your trap machines to work when it’s time to have fun – Just do it.
Plant chufa for turkeys
Chufa can be planted in May or June in the Southeast, but most plantings occur in June when summer rains start. Monitor chufa plots for competing grasses and weeds and apply herbicide accordingly. Adding chufa to your planting program can be quite rewarding if you like to see or hunt turkeys. Turkeys primarily utilize chufa in the fall, winter and spring once the tubers have developed. If your turkeys have never seen chufas, you may need to lightly disk a strip through the patch in late winter to expose tubers. Once turkeys find them, you will not be able to keep them out. A word of caution – raccoons and hogs like chufas as well and can pose problems in some areas. Chufa patches can often be regenerated the following spring by lightly disking the areas. There has to be adequate chufa seed remaining to regenerate an adequate stand (there’s often more left than you may think). To regenerate the stand, lightly disk the plots once in April, again in May, and once more in June. The key is to continue disking each month regardless of how nice your plot is growing with chufas – it’s going to kill you, but do it. Be sure to rotate your chufa patches every 2-3 years to avoid nematode problems.
Widen roadsides to create roadside management areas
Summer is a great time to create roadside management areas throughout your property. Creating roadside management areas can add wildlife and aesthetic value to your property. Regardless of how intensely you manage these areas, they will create more “edge” habitat which is preferred and used by most game animals. To create a roadside management area simply clear the understory and undesirable trees along a roadside, lime/ fertilize as needed, and periodically mow to maintain control of encroaching trees species and maintain a relatively low understory (avoid keeping a “manicured” look by mowing roadways often – this does not offer as much wildlife value). How wide you make the area is site specific, but 10-20 yards wide is generally wide enough to accomplish the goal. Be sure to leave desirable mature trees within the managed area. These trees will provide shade to conserve moisture in the summer and will add aesthetics along the road. If you desire to intensively manage your roadsides you can seasonally disk or burn them to promote desirable weeds, and/or install wildlife plantings such as clovers, sorghum, or wildflowers. Wildflowers provide both esthetics as well as bugging areas for turkeys. Managing roadsides not only increases the aesthetics of the property and adds wildlife value but will increase wildlife viewing opportunities.
Take care of new fruit trees or other tree plantings
Many landowners, wildlife managers, and hunters incorporate fruit trees into their wildlife management program to provide additional food sources and aesthetics to their property. Many have taken great care in deciding where to plant these trees, dug the appropriate sized hole, loosened the surrounding dirt, added time released fertilizer and moisturmizer packets, firmly packed soil around the root ball, and added a tree tube to protect the tree and enhance growth – then walked away to later find the tree died. Due to the transplanting process itself, which causes a good bit of stress on a tree, some trees simply do not make it. However, in many cases the tree died from a combination of being stressed from transplanting and not being taken care of (TLC – tender loving care). Simply planting the tree is not enough in many cases. After planting a tree in late winter, tree survival is much higher if you ensure weed competition is eliminated (normally done via application of herbicide) in the immediate area of the tree. Weeds compete with the trees for nutrients and water. Speaking of which, it is important to monitor rainfall and water trees when needed during their first year after being transplanted. Most trees have been propagated and grown in a nursery where they grew in ideal conditions – adequate nutrients, water, and sun. Some trees do not fare well with the struggles of the “real world” where a sprinkler is not providing daily water. Thus, taking a little extra care of them during their first year will help them adapt and develop a root system that can better handle periodic droughts. Another helpful tip is to place 3-4″ of mulch around the base of the trees. Mulching will reduce weed problems due to the unfavorable germination conditions under the mulch (no sunlight) and will also conserve soil moisture. I mention this in the June/July Calendar because this seems to be when the highest mortality occurs, which makes sense due to the very hot and dry conditions during this time.

Start preparing and planting dove fields
Dove field preparations should begin by June or July. Planting dates will depend on the soil moisture, crops you are planting, and the time required to produce seed. Common dove field crops include a variety of millets (e.g., dove proso, browntop, Japanese, pearl, etc.), sunflowers, grain sorghum, corn, and wheat. For best results obtain soil samples and apply required lime and fertilizer before planting. A mistake commonly made is planting too late. Commonly planted dove field crops generally take between 50 and 90 days for seed to mature. Know the maturity period for the crop you are planting and plant accordingly. Keep in mind that soil conditions and rainfall will play a role in when crops are planted. Don’t hesitate to plant when conditions are right even if your crop will mature 2 weeks before dove season. While seed of planted grains offer attractive food sources for dove, maintaining a clean disked strip or two through the field offers dusting areas for dove. These are strips that you do not plant, rather simply keep plowed through the summer and into dove season. Dove find these bare dirt areas attractive which will keep them in and around your field until grain seed is mature. It also offers landing areas and access to seed once it matures as well. Another trick that I have used many times with great success is to include/spread pea gravel (very small gravel) along roads that are within the dove field area. Dove “eat” the smallest particles of gravel to assist in digestion (used in their gizzard to break down seeds and other food parts). This is the reason dove are often seen “feeding” along roadsides.

Complete draining duck ponds and prepare for planting
Those managing moist soil areas/duck ponds (i.e., native vegetation vs. planting agricultural crops), should have started the spring drawdown around 45 days after the last frost. Slow drawdowns, those that take 2-3 weeks, are desired because they result in a more diverse wetland plant community than rapid drawdowns. A diverse community of wetland plants will provide many different types of food sources (seeds and insects). By May or early June, drawdowns should be complete allowing native moist soil plants to establish and actively grow. Herbicides can be a useful tool to remove undesirable vegetation if it becomes a problem and is dominating the pond. Button bush and sesbania (wetland shrubs) can be beneficial, but should be kept in check and not allowed to comprise more than 25% of the pond.
If you plan to plant an agricultural crop rather than manage the native vegetation, leave the pond flooded until closer to planting time. That is, drain ponds you plan to “plow and plant” a few weeks before you start plowing and preparing the soil for planting. Leaving the pond flooded until this time will provide weed control and will reduce tractor time later. Drying time will vary depending on your soils. It is better to drain early than to wait and not be able to work the ground because it is too wet and chance running out of growing season. My personal favorite crop for duck ponds is rice. Rice, however, requires more time and effort to manage and takes about 120 days to produce seed (depends on variety used) so you need to plant early. For best results obtain soil samples and apply required lime and fertilizer before planting. Japanese millet is also a favorite of ducks and is easily grown by duck pond managers. In fact, Japanese millet can be top dressed or broadcasted onto mud flats of a wetland or beaver pond. Japanese millet is a strong re-seeder, meaning that it will produce seed that will germinate the following year.

Take advantage of dry duck ponds – maintenance, repairs, and build hunting blinds
Unless you are keeping water on a duck pond to act as a weed screen until it will be drained later this summer for planting, now is a great time to make needed repairs to water control structures, catwalks, hunting blinds, and levees. While the pond is relatively dry, I often lubricate and check water control valves to ensure they work properly. This is also a good time to remove muck that builds up in front of drain pipes or along pond edges. In some cases, re-leveling with a tractor may be needed. If you use flash board riser type water control structures, pull and clean all the boards – make repairs where needed. This is also a great time to inspect duck blinds and perform routine maintenance or repairs as needed, or build new ones. From a habitat management standpoint, this is also a good time to inspect the pond for undesirable vegetation such as sesbania, willows along the dam or levee, etc.. A chainsaw, machete, and/or herbicide applications are the tools of choice for removing these trees.


Road maintenance – “limb” roads through herbicide applications
Summer is a great time to “knock back” vegetation along interior roads of your property. There are essentially two methods commonly used – physically removing limbs & brush mechanically or applying an herbicide to kill vegetation along roadsides. If aesthetics are important to you, using loppers, saws, and other tools to physically remove overgrown limbs and brush from roads is the way to go. However, this method is labor intensive. When manually “limbing” roadsides I often use a tractor with a bucket and a gas powered pole saw. An efficient set up requires 3-4 people. One person drives the tractor, one is in the bucket cutting limbs with the pole saw, and the others are behind dragging limbs/brush into the woods and cutting smaller brush that the tractor misses. Applying herbicide along roadsides is a great way to accomplish the same results, but as vegetation dies it will be visible along the roads for a period of time. That is, once the vegetation (e.g. brush and limbs of larger trees) are sprayed they will die turning brown. Though it is unsightly for a couple months, the herbicide method produces better long term results. When choosing the herbicide method, it is important to make sure you use an herbicide that will kill the intended species you are trying to control and that is not “soil active” meaning that it gets transported to the soil and will kill entire trees or shrubs (unless of course this is your goal). I often use Garlon (triclopere) or RoundUp (glyphsate) to “limb” roads. These herbicides only kill the portion of the tree or shrub you spray. That is, it does not kill the entire tree. Parts that are sprayed generally die within a few weeks or a month after the application and limbs will drop shortly afterwards. Herbicide method generally results in a cleaner roadside because it gets sprayed on all the vegetation within the zone you are trying to control, whereas using the pruning method, only the limbs that are physically removed are taken out. Again, it is very important to read and understand the label of any herbicide before application. Limbing roads not only removes limbs and brush that scratch your truck and equipment, but it makes traveling roads safer by increasing visibility, allows more sunlight to reach the road to reduce time needed to dry, and it results in better quality wildlife habitat along roads due to the regenerating vegetation.
