Flowers of crimson clover attract an abundance of insects which are the primary food source for young turkeys.
Management Calendar

Management Calendar — March/April 2011

DE
Certified Wildlife Biologist
Dave Edwards is a certified wildlife biologist and regular contributor to Wildlife Trends Journal and other hunting/wildlife publications. Dave was honored as QDMA's 2007 Deer Manager of the Year and nominated in 2011 as Alabama Wildlife Federation's Wildlife Conservationist of the Year. Dave is President of Tall Tines Wildlife & Hunting Consultants, Inc.

Issue: March/April 2011 · Season: Spring

Many property management activities in March, April and May are geared towards planting crops. Some of these crops provide immediate benefits to wildlife on your property, while some are planted to provide benefits later in the year. With your specific goals and property attributes in mind, it is a good idea to determine your planting needs in late winter so that you are prepared when optimal planting dates arrive in spring. As you will see, many of the management calendar activities in this issue are directed towards plantings or managing food plot crops to increase the wildlife value of your property which may include providing quality food, cover and security.

Subsoil food plots

Soil compaction, also called hardpan, may limit or constrain forage production and plant survival in food plots. A hardpan is a densely compacted layer of soil that lies between the topsoil and the subsoil. Generally speaking, depth of hardpans vary but are often 4″-12″ below the surface of the soil and are caused by the weight and pressure of tractors (and other equipment) on the soil and repeated disking/tillage over several years that loosen top soil allowing the finest particles of the soil (clay) to migrate downward, accumulate, and bind creating a very dense layer. This dense layer is “the hardpan”. Image it as a layer of concrete below the surface of the soil. As you would expect, water and oxygen do not travel well through hardpans, thus during periods of adequate rainfall, water may lie in puddles on the surface of the compacted soil and evaporate before it can seep down into the soil. Similarly, during periods of low rainfall, the topsoil of food plots that have a hardpan dries out quickly due to the shallow layer of topsoil and inability to draw moisture from subsoil resulting in stressed or dead food plot crops. Hardpans can be easily detected in food plots using a soil probe, which is a 2′ to 4′ metal rod – sharpened on one end to penetrate the soil, and a handle on the other end to assist in pushing the probe through the soil. You can make a probe out of rebar or purchase one from a forestry supply company (www.forestry-suppliers.com) for about $75. The best time to check for hardpans is when the soil is not extremely wet or dry. Insert the probe at various locations across the food plot. As the probe is inserted, the force required to move it through the soil should remain about the same until a hardpan is reached. Upon hitting a hardpan, it will take much more effort to push the probe. From my experience, hardpans in food plots are often 4″-6″ below the surface, which is the depth at which most disks plow, and may be 2″-10″ thick depending on soil type and age of the field. Breaking the hardpan is often referred to as “subsoiling” which breaks up the soil to depths of 6″-12″ and fragments compacted soil allowing water and roots to penetrate into the subsoil. To subsoil, you will need to use a subsoiling chisel plow – simply referred to as a subsoiler. Subsoilers do not invert or turn the soil like a plow used to prepare the field to plant; they are simply heavy duty steel shanks tipped with blades that drive deep into the soil and are pulled along to break the hardpan below the surface. As you can imagine, subsoiler plows cause significant soil drag and require a tractor or dozer with at least a 50 horsepower engine. A good rule of thumb is 10-15 additional horsepower is required per shank on the chisel plow. Most plows have 1-5 shanks that are set 9″ to 12″ apart. Generally speaking, subsoiling every 2-3 years will benefit soils, keep hardpans from developing, and enhance plant growth in food plots. If you do not own a subsoiler, many companies rent them. However, it is a valuable food plot implement I recommend owning if you manage many acres.

A subsoiler chisel plow has heavy duty shanks that drive deep into the soil and are pulled along to break hardpan below the surface.
A subsoiler chisel plow has heavy duty shanks that drive deep into the soil and are pulled along to break hardpan below the surface.
A subsoiler chisel plow has heavy duty shanks that drive deep into the soil and are pulled along to break hardpan below the surface.
A subsoiler chisel plow has heavy duty shanks that drive deep into the soil and are pulled along to break hardpan below the surface.

Collect soil samples and apply lime if needed to adjust soil pH in food plots.

This was a management calendar item in the February/March issue as well, but because it is critical to the success of food plots, I am including it again as a reminder. Although there are exceptions, most food plot crops grow best in a relatively neutral soil pH of 6.5 – 7.0. Thus, lime is often needed to enhance the soil (this is particularly true in sandy soils). Because it can take several months for lime to effectively change the soil pH, checking and amending the soil in the spring/early summer will allow ample time to enhance the soil before the fall planting period. Remember, ensuring proper soil pH is often more important than what you plant or how much you fertilize. Although lime can be spread any time of year, applying it at least 6 months before planting will allow time for it to enhance the soil.

Allow annual clovers planted in your fall food plots to seed out.

If you included fall annual clovers such as crimson, arrowleaf or other red clovers in your fall food plots, you will notice a strong burst of growth during spring and early summer. These clovers will provide excellent wildlife value through early-mid summer. Deer, turkeys, and other wildlife will eat the nutritious foliage of these clovers until the clovers die in summer. Another benefit of annual clovers is that insects are attracted to the flowers produced as the clover produces seed. Insects are an important source of protein for turkey poults and quail chicks. If properly managed, these clovers will produce seed that will germinate next fall and produce another good stand of clover. To ensure this happens, do NOT mow your food plots before the clover produces seed. We generally leave these fields alone and let them go fallow through late summer. After the clovers die, many weeds will begin to take their place. On many properties, these weeds provide some wildlife value. The next management we apply is early fall when we mow the plots as low as possible, allow the existing weeds a week or so to start growing again, then apply a glyphosate herbicide (RoundUp type herbicide) to prepare the ground for fall. When fall planting time arrives, apply needed fertilizer, lightly disk (or burn), then broadcast or drill cereal grains such as winter wheat and/or oats. So, if you want to regenerate annual clovers and take advantage of the free seed produced by the crop you planted last fall, do not mow your food plots before the clover seeds out.

Prepare and plant food strips for turkeys and quail.

Food strips are “food plots” for turkey and quail that wind through fields, quail courses, along fire breaks, or wooded habitat. Most supplemental food plantings for quail are established during spring and summer. Food strips are particularly beneficial in years of low native food availability. Plantings of Egyptian wheat, Sorghum-Sudan, grain sorghum, brown-top millet, fox tail millet, and pearl millet are great crops to plant in food strips and will do well in most soil types in the Southeast. Food strips should be planted in a rotational fashion. That is, in successive years place new plots adjacent to previous years plot to create a mosaic of current year plot and stubble/annual weed community from the previous years plot. Leaving the food plot stubble (not disking and replanting in the fall) will provide quality cover during fall and winter for game birds.

Plant summer food plot crops for wildlife

Throughout most of the Southeast, April and May are the desired planting period for many summer crops such as millets, sorghum, peas, corn, soybeans, etc. Because many of the seed producing grass type crops that benefit birds are summer crops, wingshooters devote a lot of energy and effort into planting during this time of year. Deer hunters are well aware of fall food plots because they are so attractive to deer during hunting season, which helps hunters observe and harvest deer, but often overlook the benefits of summer crops for deer. If you are not fortunate enough to have commercial agriculture on your property or nearby, planting summer crops will benefit your deer herd if adequate acreage is planted. Many nutrient draining biological processes such as fawning, milk production, and antler development are taking place in deer at this time. Most summer plantings for deer are very nutritious and high in much needed protein. Commonly planted summer crops for deer include many varieties of peas, soybeans, corn, lab lab, vetch, and clovers. One of my “go-to” summer blends for deer in the Southeast is a combination of clay-iron peas, lab lab, peredovic sunflowers, and grain sorghum. One mistake I often see is trying to plant these crops on small food plots. Because they are so attractive, plots need to be at least an acre, preferable more. Deer simply put too much grazing pressure on small plots and in many cases eat all plants shortly after germination before the crop has a chance to establish. Regardless of whether you are planting for birds or deer, a successful planting starts with testing the soil and applying required fertilizers and lime to ensure good soil quality. Create a clean, smooth seed bed and plant under favorable conditions. Favorable conditions mean adequate soil moisture and a good chance of rain after planting takes place. As you can imagine, weed control poses more problems in summer plantings because of the warmer growing conditions. Therefore, it is essential to monitor summer food plots for weed encroachment and treat as needed for optimal forage production.

Due to heavy browsing pressure deer can apply, plant summer food plots on fields larger than 2 acres when possible.
Due to heavy browsing pressure deer can apply, plant summer food plots on fields larger than 2 acres when possible.

Prepare now to reduce deer hunting pressure next fall.

Hunting pressure plays a significant role in the hunting quality (number and quality of deer seen while hunting) of your property. Hunting pressure does not necessarily mean a lot of shooting that is spooking deer. Most hunting pressure is often applied when hunters do not shoot at all. Examples of this include making full-scale scouting trips through a property during the season, spooking deer while entering or exiting a hunting stand, and hunting stands during unfavorable wind conditions. Most Westervelt hunting clubs and clients collect hunter observation data where they record the number and quality of deer they see while hunting. This helps us assess hunting quality which plays a role in our deer harvest decisions and hunting strategy recommendations. Years of hunter observation data from our clients shows that deer sightings, particularly mature buck sightings, decrease as hunting pressure increases. Therefore, you should make efforts to keep hunting pressure to a minimum. One way to decrease hunting pressure is to screen hunting stands and hunter access areas with evergreen trees or other plantings to allow hunters to enter or exit the stand without impacting deer in the area. While evergreen trees work well for this application, we often plant tall standing crops such as corn or Egyptian wheat where needed to hide hunters. Because these are spring/summer plantings, you need to think ahead. That is, identify hunting stands now that need screening next fall. Strips of corn or Egyptian wheat need to be at least 10 yards wide to be effective since some of the crop plants will fall over after heavy frosts. Obviously wider strips will better conceal hunters.

Keep feeding troughs full for deer

For those who implement a supplemental feeding program for deer, you have probably noticed a significant decrease in feed consumption during the spring green-up period. As this new vegetation begins to mature or “harden up” it will be less nutritious and attractive to deer and feed consumption will increase. Although supplemental feed should be provided throughout the year (or at least when it is legal), May through September is the most critical period to ensure deer have a quality diet. Supplemental feeding is particularly beneficial to deer herds in poor quality habitats such as coastal plain areas or areas with deep sandy soils. There is simply a larger nutritional gap to fill on these less fertile habitats. Many biological processes such as antler growth, fawning, and milk production occur in deer during this period. Later in summer is also the period in which quality natural food sources are often at their lowest. I recommend providing a quality nutrient rich feed that contains protein, calcium, phosphorus, fiber, etc. Whole corn should be avoided when possible unless you are “training” deer to use new feeding stations or your goal is purely to attract deer. Lastly, remember that supplemental feeding is just what the name implies – a supplement to properly managing the natural habitat and deer herd. It is the highest hole to “patch” in your management bucket, meaning everything else should be in place before a supplemental feeding program is undertaken or implemented.

Deer use of supplemental feed increases during late spring as their nutrient demands increase and natural vegetation begins to mature
Deer use of supplemental feed increases during late spring as their nutrient demands increase and natural vegetation begins to mature

Drain hardwood areas (aka – greentree reservoirs or GTR’s) that are being intentionally flooded and managed for waterfowl

Managing and flooding hardwoods is a common management practice to attract and provide quality food for waterfowl and/or a way to increase duck hunting opportunities on a property. To be effective, the manager must have the ability to control water levels within the area. Most GTR’s are created by building a small dam or levee around the hardwood area being managed that allows to hold water on the area. Water control structures are used to allow the area to flood, control the depth of flooding, and to release water or drain the area. The timing of the flooding or flooding regime/strategy is very important and, over time, will affect the species of trees that will exist in the area. Ideally, the goal is to have quality oak species that will produce acorns for ducks to eat; along with quality vegetative and aquatic food sources. Most of the desired oak species such as water oak, cherrybark oak, pin oak, laurel oak, and others, are flood tolerant during the winter because they are dormant then, but are not flood tolerant during the growing season. Thus, areas that contain desirable oaks need to be drained before spring green up (which varies throughout the Southeast) to ensure their survival. Areas that are allowed to remain flooded into the growing season will slowly convert to flood tolerant tree species such as tupelo and cypress or other less desirable tree species. Without management, Mother Nature dictates the tree species in an area that floods. Think about areas on your property that remain flooded or only flood during the winter. Areas that remain flooded through summer or year round will be primarily composed of undesirable tree species for waterfowl. Having said this, many of these areas are still attractive to waterfowl due to the aquatic plants and associated invertebrates that colonize in the water. If you do not have a GTR on your property, but have area(s) that would lend themselves to this type of management, spring and summer is the best time to create one. Depending on the situation, constructing a GTR can be relatively easy and inexpensive and will add additional recreational opportunities for you to enjoy. One word of advice that will save you time and money – consulting with a professional is money well spent during the planning stages.

Clean and store prescribed burning equipment

The Westervelt team burned many acres this winter to enhance wildlife habitats on properties we manage. In my travels, I saw smoke plumes from fires others were conducting. It always brings a smile when I see smoke because I know it is creating better habitat for wildlife (unless it is a wildfire). Now that the dormant burning season is over, take time to clean and properly store equipment used so that it is in good working order the next time you burn. Burn fuel should be properly labeled and stored in a dry/cool place – actually I try to use up all burn fuel during the burning season if possible so that I do not have to worry about storing flammable material. Take firepots apart and clean/replace wicks if needed. Ensure the rubber seal on the lid is in good shape and replace any parts that show excessive wear. Clean and inspect handles, parts, and screws of fire rakes, flappers, etc. Although I use my herbicide tank/sprayer for fire suppression (water), I generally take time in late spring/early summer to clean it up and do general maintenance because I know I will be using it a good bit throughout the summer.

Control feral hog populations

Feral hogs are very destructive and a nuisance on many properties throughout the Southeast. While hogs add additional hunting opportunities for landowners, they are difficult to control. I often hear “I’d like to have a few hogs on my property to hunt”. I agree and enjoy hunting hogs from time to time. However, if you’ve ever had hogs, you know this is not possible…you can not have a “few” hogs. A property normally has no hogs or an overabundance of them. The reproductive potential of hogs is extremely high in good habitats. With pregnancies lasting only 115 days, hogs generally produce 2 litters of 1-13 piglets per year, with the potential to have 3 litters! So needless to say, extreme/aggressive control is needed to simply keep up with or stabilize a hog population. There are many ways to remove hogs. Some of the most common methods include trapping, recreational hunting, and professional hunting/trapping or a combination of all. Hog control should be applied throughout the year or when needed. However, many landowners increase efforts during the summer to reduce disturbance and “hunting pressure” during hunting season. Besides their destructive nature on wildlife habitat, hogs can destroy roads, food plots, pond dams and many other structures on your property. They can do several thousand dollars worth of damage in a short period of time. Controlling hogs will save you time, money, and frustration.

Establish photo points

Early summer is a great time to begin assessing habitat response from management strategies you have employed over the past year. Pictures are a great way to monitor and document the progress of these habitat enhancements. Examples of areas to monitor include areas that you have burned, harvested timber, applied herbicide, strip disked, fruit tree orchards, and food plots. Several photo points should be located throughout your property. Make sure to take notes or mark on a map where each photo point is located so that you can take the same picture over time. Many landowners take a picture from each location every 6 months. Pictures taken over time from these locations will reveal habitat changes and progress made. To ensure you take the same picture each time it is helpful to mark these locations on a map for future reference.