Creating a seed measuring bucket is a great tool to ensure proper seed rates are being planted on food plots
Management Calendar

Management Calendar — September/October 2015

DE
Certified Wildlife Biologist
Dave Edwards is a certified wildlife biologist and regular contributor to Wildlife Trends Journal and other hunting/wildlife publications. Dave was honored as QDMA's 2007 Deer Manager of the Year and nominated in 2011 as Alabama Wildlife Federation's Wildlife Conservationist of the Year. Dave is President of Tall Tines Wildlife & Hunting Consultants, Inc.

Issue: September/October 2015 · Season: Fall

October/November 2015

Create a seed scale to ensure accurate seeding rates are applied when planting food plots

How many times have you ever been in the woods planting a food plot and had to guess on the amount of seed to pour into the spreader for that particular food plot? Here’s a tip that will help you more accurately measure the amount of seed to put in the spreader. Before going to the field, use a bucket (3 or 5 gallon size works fine) to weigh the various types of seeds/blends you are using. Once you are at the desired weight for each seed type (e.g., 10 lbs. of oats), use a Sharpie pen to place a mark (and weight) on the bucket. It helps to use a clear bucket so you can see the outline of the seed from the outside. Due to the size and weight variations in different seeds or blends, you will need to follow this process for each of the different seeds or blends. For example, you may have a mark for 10 lbs. of oats and another for 5 lbs. of crimson clover. Once marked, the bucket can serve as an accurate “measuring cup” to measure seed being placed in the spreader. This will ensure proper seeding rates are applied on the acreage you are planting.

Conduct pre-season projects that will help reduce or minimize deer hunting pressure and disturbance

Hunting pressure and disturbance on a property significantly impacts the hunting quality or number of deer you will see. I have lots of hunter observation data that shows that as more pressure is applied, fewer deer (particularly mature bucks) are seen. Here are a few things that will help minimize hunting pressure: 1) Position stands around food plots so that hunters can enter and exit them without spooking deer. By this I mean place stands slightly inside the woods and/or plant a “screen” that will protect the hunter from being seen by deer in the field. Good screens include standing summer crops such as corn, Egyptian wheat and Sorghum Sudan. Other more permanent screens (which I prefer) include switchgrass, or evergreen type shrubs or conifers. Once stands are placed inside the woods, simply cut shooting lanes for hunters to see and harvest deer on the food plot. 2) Inspect stands to make sure they are safe, but from a disturbance standpoint, check for noises. Oil squeaky chairs, windows, doors, etc. Move around in the stand. Does it creak? Find the source and fix it. Ladders may simply need to be tightened. These little noises can ruin a hunt and disturb deer for future hunts. 3) Cut and clear trails for hunters to get to and from the stand without making a lot of noise. 4) Determine favorable wind directions for each stand and do not hunt the stand unless the wind is right. At my camp, we have a list of stands for each wind direction (see “create a wind map” calendar item). We check the wind, review the list, and hunt accordingly. 5) Look at a map of your property and determine which roads will impact or disturb deer or other wildlife. Close these roads down before and during hunting season and only travel them on a “need to” basis. Besides properly managing the deer herd, the key to having high quality hunting experiences it to keep disturbance on the property to a minimum. For more detailed information on managing hunting pressure refer to an article titled “Steady Under Pressure” that was published in an earlier Wildlife Trends issue.

It is impossible to get into or out of this stand without spooking deer in the food plot. Simply moving the stand inside the woods and leaving standing corn in front of it would significantly reduce hunting pressure on this plot.
It is impossible to get into or out of this stand without spooking deer in the food plot. Simply moving the stand inside the woods and leaving standing corn in front of it would significantly reduce hunting pressure on this plot.

Coordinate food plot planting with good soil moisture

Generally speaking, October through early November are the best months to plant fall food plots in the Southeast. The goal is to plant when conditions are favorable for maximum seed germination and plant growth. Don’t fall into the trap of planting too early. Unfortunately, many landowners and hunters plant in early-mid September. Some hunters, particularly hunting clubs, even pick a specific weekend that food plots will be planted well ahead of time and do not have a clue what the soil conditions will be like….but they plant anyway because “that’s when we plant every year”. September is often a very dry period across the Southeast which will lead to food plot failure. If planted in September and you are lucky enough to receive adequate rainfall, food plots may grow rapidly which will result in over mature (i.e., high/tall) food plots by the time hunting season arrives. This is very common when an abundance of acorns are present (which based on my observations so far, seems to be the case this year in many areas of the Southeast). That is, deer are more focused on eating acorns which allows food plots to grow tall. There is also a higher chance of army worm problems if temperatures are still warm. In most areas of the Southeast more consistent rainfall events begin in October as cold fronts move south. Planting “later” (meaning in October-November) will also result in young, tender food plots that are very attractive to deer and other wildlife during hunting season. Very young and actively growing food plots are attractive to deer. When planted under the right conditions (adequate soil moisture), plots germinate quickly and deer will begin using them within two weeks after planting. My point is to not feel rushed to get seed in the ground and focus on planting under favorable conditions. There have been several articles related to food plots and planting strategies in past issues of Wildlife Trends. Refer to these articles for more detailed information.

Food plots should be prepared for planting well ahead of planting dates. Once planting dates arrive, plant when soil moisture is good.
Food plots should be prepared for planting well ahead of planting dates. Once planting dates arrive, plant when soil moisture is good.

Clean and service walk-in-cooler

This is a task that is often overlooked until the first deer is harvested, then to find out that it is not working. If you are fortunate enough to have one, servicing and preparing the walk in cooler should be on your pre-season task list. As with any area where food is stored, the interior of a walk in cooler should be sanitized regularly. This includes the floor, walls, racks, meat hooks, etc. A plastic 2 gallon hand-held pump up sprayer is a great tool to apply disinfectants. Drains should be inspected, cleaned, and disinfected as well. Be sure to inspect weather stripping along the door and threshold. Air leaks due to the door not sealing well can reduce the life of the compressor as it has to run more often to cool the air. Lastly, give the cooler a good test run. Turn it on and let it run a day or two to make sure all is well and that the thermostat works.

Record and utilize deer hunting observations

Quality deer management involves more than producing quality bucks. It should create quality hunting experiences as well. Collecting hunter observation data (where hunters record the number of deer and quality of deer they see while hunting) allows you to monitor the hunting quality of the property. Adjustments in management strategies can be implemented accordingly to promote quality hunting. Additionally, hunter observation data is a great (and cheap) method to help assess some parameters of the deer herd. Although a camera census is, by far, the most accurate way to collect information regarding the deer herd, trends in population parameters such as the adult sex ratio, buck quality, and fawn recruitment can be monitored with hunter observation data. However, for this data to be meaningful, it must be collected accurately each year to track trends in the data. Hunter observation data is also a good way to assess hunting strategy success. When recording this information, hunters generally record when and where they were hunting (e.g., PM-food plot, AM-woods, AM-clear cut, etc.) and what they saw. When the data is analyzed, it provides insight as to which hunting methods and which areas are most productive for the property. For example, through hunter observation data collected throughout the season, you may find that hunters saw more mature bucks per hunt in thinned pine stands in the morning verses the afternoon. Thus, you can adjust your hunting strategies to enhance the productivity of your hunting time.

Harvest deer

Although biologists provide guidance on how many and what kind of deer to harvest, the hunter is the real deer manager. Remember that each time you pull the trigger you are making a deer management decision. In fact, not harvesting deer is a management decision. Unfortunately, I see many landowners with goals of producing trophy bucks that are allowing the deer herd to overpopulate because they like to see 20+ deer when they go to a stand. This situation often results in a poor quality deer herd with significant dispersal of deer to surrounding properties, less reproduction and fawn recruitment, and ultimately poor quality antlers. If your goal is to manage for a quality or trophy deer herd, harvesting an adequate number of deer each year is essential to keep your deer herd and habitat healthy. In addition to maintaining a desirable deer density, doe harvest is the primary tool used to manage the adult sex ratio of a herd. Maintaining a balanced sex ratio will result in a much healthier deer herd, better quality bucks, increased fawn survival, and exciting hunting. Balancing the adult sex ratio is also one of the tools I use to increase breeding competition and get mature bucks on their feet so that my clients can see or harvest them (which is always more challenging than growing them!). Last but not least, I recommend achieving doe harvest goals as early in the season as possible.

Taking an adequate number of does each season is an essential part of successful quality deer management programs.
Taking an adequate number of does each season is an essential part of successful quality deer management programs.

Collect data from harvested deer

This information is the “backbone” of your deer program and allows you to monitor/assess its success and make sound management decisions/adjustments if needed to reach your deer management goals. Collecting this information each year is important because it will allow you to assess trends in the harvest and observation data which will help you determine if your program is working and where adjustments are needed. Without this information you are simply guessing and are less likely to achieve your goals. Contact your local state wildlife biologist or a wildlife consultant to determine what information/data you need to collect. Be sure to stock your skinning shed with the needed data sheets and tools needed to record data before the season starts. Other preparations include calibrating scales, inspecting/repairing and oiling the winch used to hoist deer, and checking water hoses and nozzles.

Mow and fertilize perennial clover food plots

While preparing fall annual food plots, do not neglect perennial plots that you have managed through the summer. Early fall is a good time to give them their final mowing and a boost of fertilizer. With cooler temperatures and fall rains, clover will start recovering from the stress associated with the heat of summer. Do NOT mow the clover too low. Just above the clover plants is good (clipping the flowers and other weeds). If you will be tackling this project after mowing roads, pond dams, and other areas on your property, be sure to clean weed seeds and thatch from your mower deck before mowing any food plots. Unwanted weed seeds have a sneaky way of collecting on mower decks, then jumping off onto your well managed fertile food plots. Cleaning a mower deck is easy to do with a hand-held gas blower or a small broom. While a blower is more effective, keep a small broom on your tractor. Taking 2 minutes to clear weed seeds from a mower deck is much easier than fighting the weed once it gets established in your food plots. Also, do not use a fertilizer with nitrogen. Clover is a nitrogen fixer meaning it makes its own nitrogen. Adding nitrogen will only feed undesirable weeds, particularly grasses. As a rule, 200 lbs. of 0-20-20 per acre is a good dose. However, it is always best to test the soil fertility and apply recommended rates. If lime is needed, apply this as well.

This perennial clover plot is stressed from summer heat. Giving it a haircut and a dose of fertilizer in early fall will help it recover and provide quality food for wildlife through winter.
This perennial clover plot is stressed from summer heat. Giving it a haircut and a dose of fertilizer in early fall will help it recover and provide quality food for wildlife through winter.

Calibrate deer scales before hunting season

Whether the scales you use to weigh harvested deer at your hunting property are 10 years old or right out of the box, they should be calibrated each year before hunting season to ensure accurate weight data is collected. To calibrate scales, simply hang an object of known weight from the scale (e.g., 50 lbs. bag of feed, tractor weight, 10 lb. dumbbell, etc.), along with your gambril (normally a triangular metal hanger used to attach deer to scale), then adjust the scale to the known weight if needed. Although there are many makes/models of scales available most have a calibration screw that can be easily adjusted. Also note that it is not uncommon for a calibrated scale to read something other than “zero” when idle. Recording accurate weights from harvested deer provide insight to the health of deer on your property and will assist in making management decisions (herd and habitat) to achieve overall goals.

Create a wind map for all deer stands

Most hunters know that deer have an exceptional sense of smell. Once a deer’s nose detects one hint of danger, the game is often over for a hunter. Producers of consumer deer scents and human odor eliminators have capitalized on this and have become a multi-million dollar industry. There are not many deer hunters out there that haven’t bought at least one bottle of doe-in-heat urine! Unfortunately, there are many hunters out there that think if they spray down with human odor remover, dab on some deer urine, and wear their “scent concealment suit” that they do not need to pay attention to the wind. Regardless of scent free efforts, my experience has been that if a deer gets downwind, chances are very high that it will detect me. This is not to say that these efforts are fruitless. One of the best ways I have found to assist in “scent management” and help minimize hunting pressure on a property is to create a wind chart for all hunting stands to help hunters make good decisions on where to hunt. A wind chart is simply a table that lists wind directions across the top (e.g., N, NW, NE, S, SE, etc.) then lists the stands along the left column. In the row for each stand a checkmark is placed in each of the winds this stand can be hunted (see example). On flat land, this task is relatively simple. The true wind direction is relatively constant across the landscape. However, on properties with rolling or steep topography, the true wind direction is often disturbed, altering its direction by hills, bluffs, valleys, etc. When this happens, the wind direction at a particular deer stand may be 180 degrees from that of another stand somewhere else on the property. In this situation, the best method of determining which wind is best for specific deer stands is to visit stands on various true wind directions and record how it is reacting at that stand. Once complete, a wind chart makes deciding where to hunt easier and can significantly improve hunting experiences and success.

Hunting Stands – Wind Chart
Brickhill Plantation

⊕ = Best Wind For Stand
X = Do NOT hunt stand
(blank) = Margin Conditions

Hunting Stands – Wind Chart, Brickhill Plantation
Hunting Stands – Wind Chart, Brickhill Plantation